Garbage disposal humming or not working? What to try
Reviewed
Most garbage disposal problems are a jam or a tripped overload. Both are usually quick to clear. If not, a plumber licensed by the Texas State Board of Plumbing Examiners (TSBPE) can repair or replace it.
Before you touch anything: switch the disposal off at the wall switch and unplug it under the sink (or switch off its breaker). Never put your hand inside.
It hums but doesn’t turn
It’s jammed. Many disposals have a hex socket in the center of the bottom; with the power off, turn it back and forth with the hex key that came with it until it moves freely. Then remove anything loose with tongs.
It does nothing at all
- Press the red reset button on the bottom of the unit. It pops out when the motor overheats.
- Check the wall switch and the breaker.
It leaks
Leaks at the sink flange, the dishwasher hose or the drain connection can often be tightened. A leak from the body of the unit usually means it needs replacing.
Call a plumber when
- It keeps jamming or tripping the reset.
- It leaks from the unit itself.
- The sink drains slowly even when the disposal runs.
- You’d like it replaced.

