Slow drain? What to try, and when it’s time for a plumber
Reviewed
One slow drain is usually a clog close to the fixture, and often something you can clear. Several slow drains at once usually means a problem further down the line, which is a job for a plumber licensed by the Texas State Board of Plumbing Examiners (TSBPE).
One slow drain
- Bathroom sink or tub: hair and soap collect around the stopper. Pull the stopper out (most lift or unscrew) and clean it and the opening.
- Plunger: use a cup plunger for sinks and tubs, a flange plunger for toilets. Block the overflow hole with a wet cloth so the plunger can push.
- Drain snake: an inexpensive plastic or hand-crank snake reaches clogs the plunger can’t.
- Kitchen sink: grease, coffee grounds and food scraps build up. If you have a garbage disposal, run it with cold water and check its reset button.
What not to do
- Don’t mix drain chemicals, or use a plunger after pouring them in: they can splash back.
- Don’t pour grease down the drain, even with hot water.
- Repeated chemical use can damage older pipes. If a drain needs it every month, have a plumber look.
Call a plumber when
- Several drains are slow, or a toilet gurgles when the sink or washer drains.
- Water comes up in the tub or shower when you flush.
- You smell sewage, or the clog comes back within days.
- The drain is slow at the cleanout outside, or after heavy rain.
A plumber can run a camera down the line to find roots, a collapsed pipe or a belly in the sewer line before recommending a fix. More: what a Texas plumbing license means.

