AC leaking water inside? What it usually means
Reviewed
An air conditioner pulls water out of the air, and that water drains away through a pipe called the condensate line. Water around the indoor unit almost always means that path is blocked or overflowing. Some fixes are simple; others need an A/C contractor licensed by the Texas Department of Licensing and Regulation (TDLR).
First
- Turn the system off at the thermostat and keep water away from electrical parts and outlets.
- Mop up and move anything that could be damaged.
Checks you can do
- Drain pan: look under the indoor unit. A full pan means the drain is blocked.
- Float switch: many systems have one that shuts cooling off when the pan fills. If your AC stopped and there’s water, this is likely why.
- Filter: a clogged filter can freeze the coil, and the melting ice overflows the pan. Replace it.
- Ice: if the coil or lines are frozen, leave the system off (or on Fan only) for a few hours to thaw.
- Where the line ends: the condensate line usually ends outside near the outdoor unit or at a drain. If it’s dripping normally while the AC runs, the line is at least partly clear.
Call an HVAC pro when
- The leak keeps coming back after you clear the filter and the pan.
- The coil keeps freezing.
- Water is coming through a ceiling below an attic unit.
- You see rust or a crack in the drain pan.
License to look for
A TDLR A/C Contractor license. More: AC blowing warm air?

