Toilet keeps running? How to find the cause
Reviewed
A running toilet can waste a lot of water, and the cause is almost always inside the tank. Most fixes are simple parts you can replace yourself; a plumber licensed by the Texas State Board of Plumbing Examiners (TSBPE) can do it if you’d rather not.
Take the lid off and look
- Flapper: the rubber seal at the bottom of the tank. If it’s warped or dirty, water leaks into the bowl and the tank keeps refilling. Food coloring in the tank that shows up in the bowl without flushing confirms it.
- Chain: too short and the flapper can’t close; too long and it can get caught underneath.
- Float and fill valve: if water is running into the overflow tube, the water level is set too high. Adjust the float down. If adjusting doesn’t stop it, the fill valve is worn.
- Handle: a sticking handle can hold the flapper open.
Shut it off if you need to
The valve on the wall behind the toilet stops water to it. Turn it clockwise.
Call a plumber when
- Water is leaking around the base of the toilet or onto the floor.
- The tank or bowl is cracked.
- The shutoff valve won’t turn or leaks.
- New parts don’t stop it running.

