Breaker keeps tripping? What it means and when to call an electrician
Reviewed
A breaker trips to protect the wiring in your walls. Once in a while is normal. A breaker that keeps tripping is telling you something, and some causes need an electrician licensed by the Texas Department of Licensing and Regulation (TDLR).
The three usual causes
- Overload: too much running on one circuit at once, such as a space heater, hair dryer and microwave. It trips after a little while. Move something to another circuit and see if it stops.
- Short circuit: a hot wire touching a neutral or ground, often in a damaged cord, appliance, outlet or the wiring itself. It usually trips right away, every time.
- Ground fault: current leaking to ground, often where there’s water: kitchens, bathrooms, garages and outdoors. GFCI outlets and breakers trip for this on purpose.
How to reset it
Turn off or unplug what’s on the circuit, push the breaker handle fully to Off, then back to On. If it trips again with nothing plugged in, leave it off and call an electrician.
Narrow it down
- Does it trip when one appliance starts? Try that appliance on another circuit. If the other circuit trips too, the appliance is the likely cause.
- Does it trip in wet weather? Check outdoor outlets and covers.
Don’t
- Keep resetting a breaker that trips right away.
- Replace a breaker with a larger one. The breaker size is matched to the wire.
Call an electrician when
- It trips with nothing plugged in or switched on.
- Lights dim or flicker when things start, or several circuits act up.
- An outlet, switch or the panel is warm, discolored or buzzing.
- You need more capacity: a new circuit or a panel upgrade.
License to look for
In Texas, the business needs a Texas Electrical Contractor license (TECL) from TDLR, and the electrician who comes out holds their own TDLR license. More: how to check an electrician’s license in Texas.

